Professional accessories

Refine search (81 products)

Subtype of product

Manufacturer

In stock

Find our 4x4 carry accessories for professionals. Our carrying equipment are ideal for carrying your ladders and your professional equipment. These accessories are designed to withstand all kinds of weather conditions.

per page
Showing 1 - 40 of 81 items
  • Ref : 43208

    0.6m Cable Core Lockdowns is a cable lock that fits neatly into the C channel on your Rhino-Rack Heavy Duty crossbars.

    32,96 €
  • Ref : NKL-FK1

    The NKL-FK1 is a fitting kit designed so you can fit the Nautic Kayak Lifter to your Rhino-Rack heavy duty bars.The NKL is a mounting kit made so that you can put the kayak mounting aero on your Rhino Rack roof bars by drilling only a few holes to screw the kit. Use it to make the loading and the unloading from the roof of your vehicle.

    42,72 €
  • Ref : LS

    This stop for Rhino Rack ladders will be useful during your next off road trips.

    25,13 €
  • Ref : BC3

    The BC3 Conduit Clamp Set will adapt a 100mm / 4" Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 2 clamps and allows for mounting of the conduit above or below the bar.

    61,13 €
  • Ref : RF1

    The Rhino-Rack Wind Fairing has been designed around two core themes - style and aerodynamics.The 82cm-long wind fairing from Rhino Rack makes the aerodynamic of your 4x4 easier. We also devised this to ameliorate the design of your vehicle and your roof bars. The Rhino Rack wind deflector is universally adapted, which means it can easily fit to rails...

    108,62 €
  • Ref : 570

    Experience the latest in SUP carrying technology with the Nautic 570 Side Loading SUP Carrier.Thanks to the nautic 570 kayak carrier with a side loading, you can load your equipment without too much effort on your 4x4 roof racks.

    179,59 €
  • Ref : 43209

    1.2m Cable Core Lockdowns is a cable lock that fits neatly into the C channel on your Rhino-Rack Heavy Duty crossbars.

    40,99 €
  • Ref : 43174

    Mount LED Lights weighing up to 7.5kg / 16.5lb onto your Rhino-Rack Vortex and Heavy Duty crossbars.Mount your LED to secure them with the Rhino Rack support. Its loading charge goes until 7.5kg.

    73,20 €
  • Ref : S604

    The Rhino-Rack Vortex Eye Bolt is designed to create a tie off point to secure your load onto your Rhino-Rack Vortex bar.This Rhino Rack eyelet is adapted to Vortex or Rhino rack rails.

    20,61 €
  • Ref : BCW-C

    Reinforced for carrying copper pipes, this front end cap is designed to ensure your copper pipes (up to a total weight of 15kg / 33lb), stay secure in your conduit.

    56,76 €
  • Ref : RF2

    The Rhino-Rack Wind Fairing has been designed around two core themes - style and aerodynamics.The 97cm-long wind fairing from Rhino Rack makes the aerodynamic of your 4x4 easier. We also devised this to ameliorate the design of your vehicle and your roof bars. The Rhino Rack wind deflector is universally adapted, which means it can easily fit to rails...

    111,80 €
  • Ref : 571

    Experience the very latest in kayak carrying technology with the Nautic 571 Rear Loading Kayak Carrier. Rhino-Rack's Nautic 571 is locally built by engineers with first-hand kayaking experience and features the next generation in design and technology.Thanks to the nautic 571 kayak carrier with a side rear loading, you can load your equipment without too...

    179,59 €
  • Ref : 43210

    1.8m Cable Core Lockdowns is a cable lock that fits neatly into the C channel on your Rhino-Rack Heavy Duty crossbars.

    48,87 €
  • Ref : RLH

    The Rhino-Rack Load Holder is designed so that you can secure your load in position so it doesn't slide in transit possibly damaging other items you have mounted to your roof racks.The Rhino Rack simple load holders have been designed to secure the load so that it does not fall and does not damage the rest of the equipment.

    29,78 €
  • Ref : RMPH

    Multi Purpose Holder can handle all seasons of adventure. Carry long thin items easily on HD and Vortex bars.When you want to transport fishing rods in summer or ski poles in winter, the best choice is the multi-purpose holder from Rhino Rack. It can load up to 7kg thanks to the nylon material reinforced with glass. Coil the holder around your Vortex or...

    45,60 €
  • Ref : P30-100

    The P30-100 is a 3m / 9.8ft long, 100mm / 4" diameter Conduit Carrier with Ribbed Conduit End Caps that easily screw on and off to allow you easy access to your pipes.

    184,09 €
  • Ref : RF3

    The Rhino-Rack Wind Fairing has been designed around two core themes - style and aerodynamics.The 112cm-long wind fairing from Rhino Rack makes the aerodynamic of your 4x4 easier. We also devised this to ameliorate the design of your vehicle and your roof bars. The Rhino Rack wind deflector is universally adapted, which means it can easily fit to rails...

    113,32 €
  • Ref : 580

    Experience the very latest in SUP carrying technology with the Nautic 580 Side Loading SUP Carrier. Rhino-Rack's Nautic 580 is locally built by engineers with paddle boarding experience and features the next generation in design and technology.The Nautic 580 kayak carrier with a Rhino Rack side loading is available.

    186,61 €
  • Ref : RBP-CBM

    This Plate is designed to be mounted to the headboard of a Ute to keep the load area clear.This roof console from is adapted to Toyota HDJ100 4x4 from before 2002.

    38,39 €
  • Ref : RLH1

    The Rhino-Rack Canoe Holder is designed so that you can secure your canoe in position so it doesn't slide in transit possibly damaging other items you have mounted to your roof racks.The Rhino Rack adjustable canoe holders have been designed to secure the load so that it does not fall and does not damage the rest of the equipment.

    41,84 €
  • Ref : RSLP

    The two-in-one designed small ladder peg allows you to support your ladder from sliding and well as providing a tie off point when you are securing your load.The 120mm-long Rhino Rack ladder peg makes it easier for you to carry your ladder and to slide it with an attachment point when you are securing your load.

    17,29 €
  • Ref : BCW

    Ideal for use as a replacement or spare, the BCW Conduit End Cap is perfectly suited for use with any of Rhino-Rack's 100mm / 4" width Conduit Carriers.

    35,72 €
  • Ref : 581

    Experience the very latest in kayak carrying technology with the Nautic 581 Rear Loading Kayak Carrier. Rhino-Rack's Nautic 581 is locally built by engineers with first-hand kayaking experience and features the next generation in design and technology.The Nautic 580 kayak carrier with a Rhino Rack rear loading is avaible.

    186,61 €
  • Ref : RC582

    Thanks to this pair of sand plate support, you can easily fix your plates on the roof bars.

    61,20 €
  • Ref : RLH2

    The Rhino-Rack Canoe Holder is designed so that you can secure your canoe in position so it doesn't slide in transit possibly damaging other items you have mounted to your roof racks.The Rhino Rack adjustable canoe holders have been designed to secure the load so that it does not fall and does not damage the rest of the equipment.

    75,28 €
  • Ref : RR1800

    The Rhino-Rack Alloy Roller is a great and easy way to get your ladders on and off your Rhino-Rack Heavy Duty roof racks.This 1800mm-long alloy roller from Rhino Rack is very convenient to load ladders and platforms.

    165,46 €
  • Ref : HD-FK2

    If you have a Rhino-Rack Heavy Duty Crossbar system or a Prorack Trade Crossbar and would like to mount Rhino-Rack's range of Kayak and Canoe Carriers including the Nautic 580 and Nautic 581, you will require the HD-FK2 fitting kit.Fit a kayak carrier has never been a problem with the complete kayak carrier fitting kit from Rhino Rack.

    6,29 €
  • Ref : REB

    The Rhino-Rack Eye Bolt is used as a tie off point to securing your load.The eyelets for bars from Rhino Rack are used as an anchorage point when securing your loads. As it is compatible with a lot of Rhino Rack accessories, this is one of our most used nuts and bolts. The REB kit includes two eyelets that need to be fixed directly on the Rhino Rack rails...

    23,18 €
  • Ref : RTD3

    Keeping your load stable and protected while on the move is a simple task when using our 3m / 10ft Tie Down Straps.The 3.5m-long Rhino Rack camo rapid straps are made from solid polyester straps that do not break. They also include a metal buckle and have a 225kg handing capacity.

    19,91 €
  • Ref : RR470

    The Rhino-Rack Alloy Roller is a great and easy way to get your ladders on and off your Rhino-Rack Heavy Duty roof racks.This 470mm-long alloy roller from Rhino Rack is very convenient to load ladders and platforms.

    78,01 €
  • Ref : NKL

    The Nautic Kayak Lifter is a complete system for easily loading and unloading sit on top kayaks.The kayak mounting aero is an entire system made for easy loadings and unloadings. It is the only one on the market that supports 80kgs, does not need to put effort to lift it and requires only one person to use it with the included winch. It has been made to...

    973,45 €
  • Ref : RHLTL

    The High Level Tail Light Bracket offers greater flexibility of positioning when fitting different sized lights.This Rhino Rack support for rear light provides high flexibility when installing your lights. Easy to fix. Sold by pair.

    25,28 €
  • Ref : RTD35P

    The RTD35P Rapid Straps are suitable for heavy duty use and feature a unique design registered unique Buckle Protector.The 3.5m-long Rhino Rack are adapted to intensive using and was designed to wrap the metallic buckle and offers optimal protection to avoid markings on your equipment or your vehicle.

    27,60 €
  • Ref : RR680

    The Rhino-Rack Alloy Roller is a great and easy way to get your ladders on and off your Rhino-Rack Heavy Duty roof racks.This 680mm-long alloy roller from Rhino Rack is very convenient to load ladders and platforms.

    93,64 €
  • Ref : NKL-FK2

    The NKL-FK2 is a fitting kit designed so you can fit the Nautic Kayak Lifter to the right hand side of your Thule Wingbar.The mounting kit made so that you can put the kayak mounting aero on your Thule wing roof bars by drilling only a few holes to screw the kit. Use it to make the loading and the unloading from the roof of your vehicle.

    51,96 €
  • Ref : RTD4

    Keeping your load stable and protected while on the move is a simple task when using our 4m / 13ft Tie Down Straps.Keep your loading protected and stable when moving your 4x4 is easy when you use the 4m-long Rhino Rack rapid straps. They are made in polyester that do not break. They also include a metal buckle and have a 225kg handing capacity.

    22,04 €
  • Ref : RR1650

    The Rhino-Rack Alloy Roller is a great and easy way to get your ladders on and off your Rhino-Rack Heavy Duty roof racks.

    154,29 €
  • Ref : R560

    This kayak carrier that includes a side loading is from Rhino Rack.

    106,80 €
  • Ref : RPWC

    If you're an avid camper or like to travel distances in your 4WD, you will know that a spare wheel is one of the essential items you need to bring with you. Rhino-Rack has developed a spare wheel carrier to mount to your roof racks. Suitable for HD BarsAs having a spare wheel is essential when you go on a trip with your 4x4, Rhino Rack made a platform...

    266,76 €
  • Ref : RTD45P

    The RTD45P Rapid Straps are suitable for heavy duty use and feature a unique design registered unique Buckle Protector.The 4.5m-long Rhino Rack red rapid straps are an easy way to secure your loading. Every strap has a cover that you can lock, and a buckle that resists corrosion.

    28,37 €
Showing 1 - 40 of 81 items
Newsletter
Subscribe to our newsletter and receive all our news
Coupe
Pioneer on off-road equipment since 1996
Livraison
Delivered in 24/48 hours in France
Sécurité
100% Secure