You cannot place a new order from your country. United States

Kits de portage

Refine search (1776 products)

Type of product

Subtype of product

Manufacturer

In stock

Double cab

Extra cab

per page
Showing 1 - 40 of 1776 items
  • Ref : RAB1250S

    The Rhino Rack Aero Bar Black 1250mm can be purchased in black or silver and are cut to 8 different predefined lengths to fit different vehicles. All bars include the VGS rubber band that has been designed to reduce drag and wind noise as well as additional protection for your racks and cargo. All bars include end caps.

  • Ref : M006

    This cap fits Rhino Rack bars.

  • Ref : LHS

    Essential for your roof bars and thanks to the fixing shim for HD 10mm bars (1 pair), you can space out the bar of your vehicle.

  • Ref : RK001-2

    The RHINO RACK Master Key (2 Barrels / 2 Master Keys) allows you to upgrade the locks in selected roof racks and accessories to use only one key. Eliminating the need to carry several keys. Say goodbye to the time lost to find the right key!

  • Ref : CXB

    The Heavy Duty CXB roof rack system is designed specifically for use with roofs that feature rails.The Heavy Duty Removable Rail Mount Leg (2 pairs) RHINO RACK is specially designed for use with roofs that have rails. Easy to install and remove, it features a double bolt tightening for maximum clamping force and easy adjustment. It also comes with...

  • Ref : QMPLHS01

    The adaptation blocks for the Pioneer gallery can adapt the Pioneer Rhino Rack systems to RLT600 feet. The srut are included and will permit you to assembly two feet. Most of the pioneers systems necessitate 4 to 8 feet.

  • Ref : RK001-4

    The RHINO RACK Master Key (4 Barrels / 2 Master Keys) allows you to upgrade the locks in selected roof racks and accessories to use only one key. Eliminating the need to carry several keys. Say goodbye to the time lost to find the right key!

  • Ref : LHS2PAIR

    Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle.Essential for your roof bars and thanks to the fixing shim for HD 10mm bars (2 pairs), you can space out the bar of your vehicle.

  • Ref : RK059-4

    The RHINO RACK Master Key (4 Barrels / 2 Master Keys) makes life easier by upgrading the locks of the selected roof racks and accessories to be able to use a single key. So you do not have to carry a bulky keyring and eliminate the search time of the right key!

  • Ref : DK010

    Rhino-Rack's DK kits are used in all the 2500 roof rack systems. The kit consists of the pads and clamps which attach to your vehicle's roof. The kit includes 4 pads and 4 clamps.This Rhino Rack fit kit can be used on the roof of Honda 5p 2002 and go on top of the vehicle.

  • Ref : RK093-2

    The RHINO RACK Master Key (2 Barrels / 2 Master Keys) makes life easier by upgrading the locks of the selected roof racks and accessories to be able to use a single key. So you do not have to carry a bulky keyring and eliminate the search time of the right key!

  • Ref : RB1250B

    The Rhino-Rack Heavy Duty bars can be purchased in black or silver and can be cut to 8 different predefined lengths to suit different vehicles including: 1120mm, 1250mm, 1375mm, 1500mm, 1650mm, 1800mm, 2000mm, 2400mm.The RHINO RACK black aluminum roof rack 1250mm is one of 8 predefined lengths to fit different vehicles and includes a rubber band and end...

  • Ref : RTC10

    1.0m tracks for your canopy. Sold as a pair, they come with hardware and end caps.The RHINO RACK RT Tracks 1.0m black (x2) are sold in pairs and will allow you to fix your hard top or awning. The RHINO RACK RT Tracks 1.0m black (x2) are delivered with the installation material and the end caps.

  • Ref : CXBS2

    Need a bit of extra height on your Heavy Duty CXB roof rack bars? This set of 4 spacers will give you an extra 12mm of height to work with.These 12mm-long leg spaces can line the roof rails up when adding a third rail on the middle of the roof.

  • Ref : RK093-8

    The RHINO RACK Master Key (8 Barrels / 2 Master Keys) allows you to upgrade the locks in selected roof racks and accessories to use only one key. Eliminating the need to carry several keys. Say goodbye to the time lost to find the right key!

  • Ref : RB1250S

    The Rhino-Rack Heavy Duty bars can be purchased in black or silver and can be cut to 8 different predefined lengths to suit different vehicles including: 1120mm, 1250mm, 1375mm, 1500mm, 1650mm, 1800mm, 2000mm, 2400mm.The RHINO RACK silver aluminum roof rack 1250mm is one of 8 predefined lengths to fit different vehicles and includes a rubber band and end...

  • Ref : RTC12JW

    Tracks for your canopy. Sold as a pair, they come with hardware and end caps.The RHINO RACK RTC Tracks kit (1,2m) jeep tj are sold in pairs and will allow you to fix your hard top or awning. The Rhino Rack RTC Tracks kit (1,2m) jeep tj are delivered with the installation material and the end caps.

  • Ref : RK106-4

    The RHINO RACK Master Key (4 Barrels / 2 Master Keys) makes life easier by upgrading the locks of the selected roof racks and accessories to be able to use a single key. So you do not have to carry a bulky keyring and eliminate the search time of the right key!

  • Ref : RB1375

    The RHINO RACK black aluminum roof rack 1375mm is one of 8 predefined lengths to fit different vehicles and includes a rubber band and end caps.

  • Ref : DK031

    Rhino-Rack's DK kits are used in all the 2500 roof rack systems. The kit consists of the pads and clamps which attach to your vehicle's roof. The kit includes 4 pads and 4 clamps.This Rhino Rack fit kit can be used on the roof of Toyota Hilux (starting from 2005) 4x4 and go on top of the vehicle.

  • Ref : RTC12JWMY11

    Tracks for your canopy. Sold as a pair, they come with hardware and end caps.

  • Ref : PLHS1

    The PLHS1 Pioneer Leg Height Spacer is designed to fit the Pioneer Roof Trays onto the Rhino-Rack Backbone system developed for the JEEP JK Wrangler.The raising block for gallery are made to raise the platforms of the roof to let the feet slide towards the outside on the Rhino Rack structure made for pioneer Jeep wrangler JK 4x4.

  • Ref : RB1500

    The RHINO RACK black aluminum roof rack 1500mm is one of 8 predefined lengths to fit different vehicles and includes a rubber band and end caps.

  • Ref : DK040

    Rhino-Rack's DK kits are used in all the 2500 roof rack systems. The kit consists of the pads and clamps which attach to your vehicle's roof. The kit includes 4 pads and 4 clamps.This Rhino Rack fit kit can be used on the roof of Mitsubishi L200 4x4 and go on top of the vehicle.

  • Ref : RTC14

    1.4m tracks for your canopy. Sold as a pair, they come with hardware and end caps.The RHINO RACK RT Tracks 140cm (x2) are sold in pairs and will allow you to fix your hard top or awning. The RHINO RACK RT Tracks 140cm (x2) are delivered with the installation material and the end caps.

  • Ref : PLHS3

    The Pioneer Leg Height Spacers (5mm) used to level a Pioneer system on a vehicle.The raising block for gallery are made to raise the platforms of the roof to let the feet slide towards the outside on the Rhino Rack structure made for pioneer galleries.

  • Ref : RB1500S

    The Rhino-Rack Heavy Duty bars can be purchased in black or silver and can be cut to 8 different predefined lengths to suit different vehicles including: 1120mm, 1250mm, 1375mm, 1500mm, 1650mm, 1800mm, 2000mm, 2400mm.The RHINO RACK silver aluminum roof rack 1500mm is one of 8 predefined lengths to fit different vehicles and includes a rubber band and end...

  • Ref : RTC8JW

    Tracks for your canopy. Sold as a pair, they come with hardware and end caps.The RHINO RACK RTC Tracks kit (0,8m) jeep wrangler jk 2p are sold in pairs and will allow you to fix your hard top or awning. The RHINO RACK RTC Tracks kit (0,8m) jeep wrangler jk 2p are delivered with the installation material and the end caps.

  • Ref : PLHS4

    The PLHS4 Rhino-Rack Backbone Pioneer Leg Height Spacer is designed to fit the Pioneer Roof Systems onto the RLT600 Quick Mountâ„¢ LegsThe raising block for gallery are made to raise the platforms of the roof to let the feet slide towards the outside on the Rhino Rack structure made for pioneer galleries.

  • Ref : RB1650

    The RHINO RACK black aluminum roof rack 1650mm is one of 8 predefined lengths to fit different vehicles and includes a rubber band and end caps.

  • Ref : RTC8JWMY11

    Tracks for your canopy. Sold as a pair, they come with hardware and end caps.

  • Ref : PLHSPAIR

    The Pioneer Leg Height Spacers are used to level a Pioneer system on a vehicle.The blocks were made to level out Rhino Rack pioneer platforms and to make the feet slide more largely (max: 75mm).

  • Ref : RB1650S

    The Rhino-Rack Heavy Duty bars can be purchased in black or silver and can be cut to 8 different predefined lengths to suit different vehicles including: 1120mm, 1250mm, 1375mm, 1500mm, 1650mm, 1800mm, 2000mm, 2400mm.The RHINO RACK silver aluminum roof rack 1650mm is one of 8 predefined lengths to fit different vehicles and includes a rubber band and end...

  • Ref : RTC95JW

    Tracks for your canopy. Sold as a pair, they come with hardware and end caps.The RHINO RACK RTC Tracks for Jeep Wrangler JK 4p are sold in pairs and will allow you to fix your hard top or awning. The RHINO RACK RTC Tracks for Jeep Wrangler JK 4p are delivered with the installation material and the end caps.

  • Ref : QMCM01

    The internal backing mounts used to fit a Quick Mountâ„¢ RLT600 leg onto a canopy. This item is suitable for 2 bars.The mounting kit for Rhino Rack canopies is well fit when you have 2 roof bars because it includes 4 supports. A foam stamp is included to be cut so that when you use it, it will not affect the painting.

  • Ref : RB1800B

    The Rhino-Rack Heavy Duty bars can be purchased in black or silver and can be cut to 8 different predefined lengths to suit different vehicles including: 1120mm, 1250mm, 1375mm, 1500mm, 1650mm, 1800mm, 2000mm, 2400mm.The RHINO RACK black aluminum roof rack 1800mm is one of 8 predefined lengths to fit different vehicles and includes a rubber band and end...

  • Ref : RTRL

    The RTRL allows you to connect a standard Gutter mount leg to any of the Rhino-Rack track systems. This is a great solution for vehicles that need a level roof rack system.The Adaptation kit on rail - stare on roof leaders allows you to connect a track to one of the Rhino-Rack roof racks. This is a great solution for vehicles that need a roof rack.

  • Ref : QMHD05

    The Quick Mountâ„¢ Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to the RLT600 legs. This kit fits 1 bar.The Fixing raising block for RLT600 on HD bar (5mm - pair) allows you to install the Heavy Duty Rhino-Rack bars on the RLT600 brackets.

  • Ref : RB1800S

    The Rhino-Rack Heavy Duty bars can be purchased in black or silver and can be cut to 8 different predefined lengths to suit different vehicles including: 1120mm, 1250mm, 1375mm, 1500mm, 1650mm, 1800mm, 2000mm, 2400mm.The RHINO RACK silver aluminum roof rack 1800mm is one of 8 predefined lengths to fit different vehicles and includes a rubber band and end...

  • Ref : DK067

    Rhino-Rack's DK kits are used in all the 2500 roof rack systems. The kit consists of the pads and clamps which attach to your vehicle's roof. The kit includes 4 pads and 4 clamps.This Rhino Rack fit kit can be used on the roof of Mitsubishi Pajero 4x4 and go on top of the vehicle.

Showing 1 - 40 of 1776 items
Newsletter
Subscribe to our newsletter and receive all our news
Coupe
Pioneer on off-road equipment since 1996
Livraison
Delivered in 24/48 hours in France
Sécurité
100% Secure