You cannot place a new order from your country. United States
|
Off-road supplier No. 1!
Refine search (32 produits)
Need a bit of extra height on your Heavy Duty CXB roof rack bars? This pair of spacers will give you an extra 6mm of height to work with.These 6mm-long leg spaces can line the roof rails up when adding a third rail on the middle of the roof.
Need a bit of extra height on your Heavy Duty CXB roof rack bars? This set of 4 spacers will give you an extra 12mm of height to work with.These 12mm-long leg spaces can line the roof rails up when adding a third rail on the middle of the roof.
Essential for your roof bars and thanks to the fixing shim for HD 10mm bars (1 pair), you can space out the bar of your vehicle.
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle.Essential for your roof bars and thanks to the fixing shim for Vortex 10mm bars (1 pair), you can space out the bar of your vehicle.
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle.Essential for your roof bars and thanks to the fixing shim for HD 10mm bars (2 pairs), you can space out the bar of your vehicle.
The PLHS1 Pioneer Leg Height Spacer is designed to fit the Pioneer Roof Trays onto the Rhino-Rack Backbone system developed for the JEEP JK Wrangler.The raising block for gallery are made to raise the platforms of the roof to let the feet slide towards the outside on the Rhino Rack structure made for pioneer Jeep wrangler JK 4x4.
The Pioneer Leg Height Spacers (5mm) used to level a Pioneer system on a vehicle.The raising block for gallery are made to raise the platforms of the roof to let the feet slide towards the outside on the Rhino Rack structure made for pioneer galleries.
The PLHS4 Rhino-Rack Backbone Pioneer Leg Height Spacer is designed to fit the Pioneer Roof Systems onto the RLT600 Quick Mountâ„¢ LegsThe raising block for gallery are made to raise the platforms of the roof to let the feet slide towards the outside on the Rhino Rack structure made for pioneer galleries.
The Pioneer Leg Height Spacers are used to level a Pioneer system on a vehicle.The blocks were made to level out Rhino Rack pioneer platforms and to make the feet slide more largely (max: 75mm).
The internal backing mounts used to fit a Quick Mountâ„¢ RLT600 leg onto a canopy. This item is suitable for 2 bars.The mounting kit for Rhino Rack canopies is well fit when you have 2 roof bars because it includes 4 supports. A foam stamp is included to be cut so that when you use it, it will not affect the painting.
The Quick Mountâ„¢ Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to the RLT600 legs. This kit fits 1 bar.The Fixing raising block for RLT600 on HD bar (5mm - pair) allows you to install the Heavy Duty Rhino-Rack bars on the RLT600 brackets.
The Quick Mountâ„¢ Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to the RLT600 legs. Sold as a pair of 2.The Fixing raising block for RLT600 on HD bar (10mm - pair) allows you to install the Heavy Duty Rhino-Rack bars on the RLT600 brackets.
The Quick Mountâ„¢ Heavy Spacer (20mm) allows you to fit the Rhino-Rack Heavy Duty Bars to the RLT600 legs. This kit fits 1 bar.The Fixing raising block for RLT600 on HD bar (20mm - pair) allows you to install the Heavy Duty Rhino-Rack bars on the RLT600 brackets.
The Quick Mountâ„¢ Vortex Spacer (5mm) allows you to fit the Rhino-Rack Vortex Bars to the RLT600 legs. Sold as a pair of 2 which fits 1 bar.The Fixing raising block for RLT600 on VORTEX bar (5mm - pair) allows you to install the Heavy Duty Rhino-Rack bars on the RLT600 brackets.
The Quick Mountâ„¢ Vortex Spacer (10mm) allows you to fit the Rhino-Rack Vortex Bars to the RLT600 legs. Sold as a pair of 2 which fits 1 bar.The Fixing raising block for RLT600 on VORTEX bar (10mm - pair) allows you to install the Heavy Duty Rhino-Rack bars on the RLT600 brackets.
The 5mm Quick Mountâ„¢ Base Wedge is designed to create a level bar when fitting an RLT600 Quick Mountâ„¢ leg to a track position that is curved or angled.The 5mm beveled blocks for RLT 600 are made to create a level bar while assembling a RLT600 feet with a curved or angled position.
The 10mm Quick Mountâ„¢ Base Wedge is designed to create a level bar when fitting an RLT600 Quick Mountâ„¢ leg to a track position that is curved or angled.The 5mm beveled blocks for RLT 600 are made to create a level bar while assembling a RLT600 feet with a curved or angled position.
This track wedge is designed to create a level bar when fitting an RLCP leg to a Rhino-Rack Track.The Rhino Track Wedge is designed to create a level bar when installing a RLCP leg?
The VA-FK1 is a fitting kit designed to fit the Vortex bar to RL legsVortex Bar RL Fit Kit
The VA-FK2 is a fitting kit designed to fit the Vortex bar to RLCP legsVortex Bar RLCP Fit Kit
The RBCA026 fits directly to the rear base of the RBC036 and RBC035 roof top bike carriers (incl. coloured variants) allowing you to easily mount them anywhere across your roof racks.
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle.
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle.
The Pioneer Leg Height Spacers are used to level a Pioneer system on a vehicle.
The Quick Mountâ„¢ Heavy Spacer (15mm) allows you to fit the Rhino-Rack Heavy Duty Bars to the RLT600 legs. This kit fits 1 bar.
The Quick Mountâ„¢ Heavy Spacer (25mm) allows you to fit the Rhino-Rack Heavy Duty Bars to the RLT600 legs. This kit fits 1 bar.
The Quick Mountâ„¢ Heavy Spacer (30mm) allows you to fit the Rhino-Rack Heavy Duty Bars to the RLT600 legs. This kit fits 1 bar.
The Quick Mountâ„¢ Vortex Spacer (20mm) allows you to fit the Rhino-Rack Vortex Bars to the RLT600 legs. Sold as a pair of 2 which fits 1 bar.
The Quick Mountâ„¢ Vortex Spacer (25mm) allows you to fit the Rhino-Rack Vortex Bars to the RLT600 legs. Sold as a pair of 2 which fits 1 bar.
The Quick Mountâ„¢ Ditch Bracket provides a permanent or fixed mounting point for the roof rack to attach to.
The Quick Mountâ„¢ Pioneer Spacer (10mm) enables you to fit the range of Rhino-Rack Pioneer Systems to the RLT600 Quick Mountâ„¢ Legs
The Quick Mountâ„¢ Vortex Spacer (15mm) allows you to fit the Rhino-Rack Vortex Bars to the RLT600 legs. Sold as a pair of 2 which fits 1 bar.
